Install an Interior Door Slab on Existing Door Frame $250 Labor
(32x80 30x80 28x80 24x80 @ 1 3/8 Thick) Text pictures of where your door is to be installed; Stand back approximately 10 - 15 feet and use the zoom out function on your phone zooming out 100% - Do this on both sides of the door or wall where the door is to be installed. Text over a link to the new door (or send a picture of the label attached to the door showing the door size, make / model and store code) Thicker, Wider, and Taller Doors are installed for $325+ PLEASE READ: I do not advise installing a door slab. I suggest going Pre Hung. Stand on the side of the door where you can see the hinges sticking out, close the door, notice the gap between the door and the frame. Look for any inconsistencies all around. Also, look at the gap between the door and the floor. Using a square, a level and a tape measure, check the door frame. Measure the Width of your current door slab 3 times, across the top, the middle and the bottom. See if the measurement changes by 1/16 of an inch. Measure the Height of your door, on the Left side and the Right Side. Look for differences in height. 1/16 of an inch is a difference. If you do not care so much, and just want a door that functions, then go slab. NOTE: I install pre hung doors perfectly squared. I do not shave off corners. $250 Labor Includes the following:
Extra Charges may apply, Click Here |